Bathrooms

Bathroom and Kitchen Tiling in Swindon

Good tiling is invisible: straight lines, even grout and cuts in the right places. Our own tiler works on every Kennet bathroom and kitchen, and we take on tiling-only projects too.

Hand pressing a white tile into adhesive with spacers on a wall

Tiles get blamed for a lot of bad bathrooms, but the tile is rarely the problem. It is the preparation, the set-out and the attention paid to every cut. A £20 tile laid well looks better than a £100 tile laid badly. That is why we employ our own tiler rather than bringing in whoever is free that week.

Our tiling services

  • Bathroom walls and floors, full height or part-tiled.
  • Shower enclosures and wet rooms, with full tanking and correct falls to the drain. See wet rooms.
  • Kitchen splashbacks and floors, as part of a kitchen installation or on their own.
  • Feature walls and patterns: herringbone, chevron, stack bond, vertical metro and mixed formats.
  • Large-format porcelain up to 1200mm x 600mm and beyond.
  • Natural stone, including limestone, travertine and slate, sealed properly before and after grouting.
  • Underfloor heating, laid under tiles with our electrician.

How we tile

Preparation comes first

We strip back to a sound surface. On walls, that usually means removing old tiles and plaster in wet areas and boarding with cement or foam boards. On timber floors, we overboard with tile backer or plywood to stop movement cracking grout. Floors are levelled where needed so large tiles sit flat without lipping.

Waterproofing where it matters

In showers, around baths and across wet room floors, we apply a tanking system with tape at every joint and corner. Grout is not waterproof, so this layer is what really protects your home.

Set-out before the first tile

We plan where every line will fall before any adhesive goes on. The aim is balanced cuts at both ends of a wall, no thin slivers by the door, grout lines that align with the bath edge or niche, and patterns centred on the room’s focal point. This is the step that separates a professional job from an average one.

Laying, grouting and finishing

Tiles are back-buttered where needed for full coverage, levelled with clips on large formats, and grouted in a colour you choose. We finish with neat trims or mitred edges, flexible sealant at every movement joint and a final clean that removes all haze.

Tiling prices

Tiling prices depend on the size of the room, the tile format and the preparation needed. As a guide:

Job Typical labour cost
Standard wall tiling, 300 x 600mm tiles £55 – £70 per m²
Floor tiling including levelling £60 – £80 per m²
Large-format porcelain (over 600mm) £70 – £95 per m²
Herringbone, mosaics or natural stone £80 – £120 per m²
Kitchen splashback from £350

Tanking, boarding and removal of old tiles are priced separately on your quote.

Choosing tiles

A few practical tips from our tiler:

  • Pick floor tiles for grip first, looks second, especially in bathrooms and kitchens with young children or older relatives.
  • Larger tiles mean fewer grout lines but need flatter walls. Older Swindon terraces sometimes need more prep to suit them.
  • Matt and textured tiles hide water marks better than gloss in showers.
  • Order 10 to 15% extra for cuts and future repairs, more for patterns like herringbone.
  • Choose grout colour carefully. A slightly darker grout on floors hides everyday wear.

Want to see our tiling up close? The herringbone floor and panelled walls in our Wroughton family bathroom are a good example of careful set-out.

Our work

Recent tiling projects

Herringbone wood-effect floor with a warm natural finish
Hand pressing a white tile into adhesive with spacers on a wall
Grey-tiled wet room with a rainfall shower, black toilet and tall towel radiator
See all projects

FAQs

Tiling: your questions

All FAQs

Do you take on tiling-only jobs?

Yes, for splashbacks, floors and full bathrooms, as long as we can fit them around our installation schedule. We will want to check the walls or floor first, because tiles are only as good as what is underneath.

Can you tile over existing tiles?

Sometimes, on a sound, well-bonded floor, but we rarely recommend it on walls. It adds weight, raises levels around fittings and hides any problems underneath. We will give you an honest view after seeing them.

What is the best tile for a bathroom floor?

A porcelain tile with a suitable slip rating. Porcelain is dense, hard-wearing and absorbs very little water. In shower areas we choose tiles with extra grip.

Why do large tiles cost more to lay?

They need a flatter surface, more adhesive coverage and two people to handle. The result is fewer grout lines and a calmer look, but the preparation takes longer.

Do you supply the tiles?

We can, and we often get better prices through our suppliers. You are also welcome to choose your own tiles; we will check quantities and suitability before ordering.

Related services

Modern bathroom with a wall-hung oak vanity, black basin and large stone-effect tiles

Bathroom installation

Family bathrooms designed and fitted by our own plumber, electrician and tiler.

Walk-in shower with a frameless glass screen and wood-effect wall tiles

Wet rooms

Level floors, properly tanked, with linear drains and frameless glass.

Fitter using a cordless drill to fix a kitchen unit

Kitchen installation

Strip-out to final clean by our own fitters, plumber, electrician and tiler. No subcontractors.

Free home visit

Ready to talk about your kitchen or bathroom?

Book a free home visit. We’ll measure up, talk through ideas and budget, and follow up with a fixed written quote. No hard sell.

Lines open Mon–Fri 8:00–17:30, Sat 9:00–13:00.

Call usGet a quote